> Commvault Cloud > File & Object Storage > Files > 1-Touch Recovery > Getting Started

Client Information Checklist for Interactive Recovery Using 1-Touch for Linux

To perform an interactive recovery using 1-Touch for Linux, you must create a Client information checklist before starting the restore operation. You can also use Client configuration stored on Commvault Cloud to create a Client information checklist.

Create a checklist that contains the following Client information:

Required Information How to find it
  • Client Name
  • Host Name
  1. From the navigation pane, navigate to Protect > Files > Overview. Go to the Files tab.
  2. Click the file server to view the Overview tab.
    You can view the Client Name and Host Name here.
  • IP Address
  • Net Mask
  • Backup Gateway Address
 Obtain IP address, Net Mask, and Backup Gateway address of the interface of the Client that is used to communicate with the Backup Gateway.
Example:
  1. Log in to Client computer using the root login and password.
  2. Type ifconfig.
  3. Note down inet addr and Mask for eth0
DNS Server address
  1. Log in to Client computer using the root login and password.
  2. Type cat/etc/resolv.conf.
  3. Note down the IP address for the server.
Backup Gateway Information
Backup Gateway Hostname
  1. From the navigation page, go to Manage > Servers.
  2. Click the server to view the Overview tab.
    You can view the Backup Gateway Host Name here.
Backup Gateway IP Address
  1. Log in to Backup Gateway using the administrator credentials.
  2. Open the Command Prompt or the Terminal.
  3. Type ipconfig for Windows and ifconfig for Linux gateways.
    You can view the Backup Gateway IP address here.
Metallic Proxy Username and Password Use the same username and password that you use to log in to Commvault Cloud.
Firewall Port Number You will need this information only when the firewall is set between the Backup Gateway and the Client.
  1. From the navigation page, go to Manage > Servers.
  2. Click the server, and then go to the Configuration tab.
  3. On the Network settings tile, you can view the firewall port number.
Backup Gateway Name
  1. From the navigation pane, navigate to Protect > Files > Overview. Go to the Files tab.
  2. Click the file server to view the Overview tab.
  3. On the Protection Summary tile, click the plan name.
    The plan Overview page appears.
  4. On the Storage Policies tile, in the Copies Table, click Storage Policy Name.
    The Storage Policy page appears.
  5. Click the Backup Location tab to view Associated Backup Gateways Name.

Loading...